HP Hitachi Dynamic Link Manager Software - Manual (Page 211)

Message ID Message Text Explanation
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2 .
KAPL20027-W I/O (aa...aa) to path (bb...bb)
failed. Device status=cc...cc
Details
An I/O error occurred.
aa...aa: SCSI command
bb...bb: Name of Path that had I/
O error
cc...cc: Device status
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2 .
KAPL20028-I The owner controller of device
(aa...aa) was changed to
(bb...bb).
Details
The owner controller of the LU
connected to the path with the ID
shown in the message was
changed.
aa...aa: Path ID of the changed
LU. (same as PathID of view -
path) (Decimal number)
bb...bb: Owner controller ID after
the change. (Hexadecimal
number)
Action
None.
KAPL20029-I The owner core of device
(aa...aa) was changed to
(bb...bb).
Details
The owner core of the LU
connected to the path with the ID
shown in the message was
changed.
aa...aa: Path ID of the changed
LU. (same as PathID of view -
path) (Decimal number)
bb...bb: Owner core ID after the
change. (Hexadecimal number)
Action
Messages
8-53
Hitachi Dynamic Link Manager User Guide for VMware ®