HP Hitachi Dynamic Link Manager Software - Manual (Page 175)

Message ID Message Text Explanation
KAPL01101-W The target HBA port was not
found. Operation name =
aa...aa
Details
The HBA having the HBA port
WWN specified in the -
hbaportwwn parameter could not
be found.
aa...aa: offline or online
Action
Use the view operation of the
HDLM command (dlnkmgr view -
path -hbaportwwn) to check the
target HBA port WWN. After that,
specify the appropriate HBA port
WWN, and then retry.
KAPL01102-I All the paths which pass the
specified aa...aa port will be
changed to the Offline(C) status.
Is this OK? [y/n]:
Details
Multiple paths will be collectively
placed Offline(C) because the -
hbaportwwn parameter was
specified. To collectively place
multiple paths Offline(C), enter
y. To not collectively place them
Offline(C), enter n.
aa...aa: HBA
Action
If you want to execute the offline
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01103-I If you are sure that there would
be no problem when all the
paths which pass the specified
aa...aa port are placed in the
Offline(C) status, enter y.
Otherwise, enter n. [y/n]:
Details
This message re-asks the user
whether to place all the paths
Offline(C). To place all the
paths Offline(C), enter y. To not
place them Offline(C), enter n.
aa...aa: HBA
Action
If you want to execute the offline
processing for the paths which
pass the specified target, enter y.
If you want to terminate the
processing, enter n.
KAPL01104-I All the paths which pass the
specified aa...aa port will be
changed to the Online status. Is
this OK? [y/n]:
Details
Multiple paths will be collectively
placed Online because the -
hbaportwwn parameter was
specified. To collectively place
multiple paths Online, enter y. To
not collectively place them
Online, enter n.
Messages
8-17
Hitachi Dynamic Link Manager User Guide for VMware ®