HP Hitachi Dynamic Link Manager Software - Manual (Page 181)

Message ID Message Text Explanation
the DLMgetras utility, see The
DLMgetras Utility for Collecting
HDLM Error Information on page
7-2 .
KAPL01150-E The HDLM command cannot be
executed because the VMware
vSphere CLI is not installed.
Details
The VMware vSphere CLI might
have been removed after the
utility for configuring HDLM
remote management client
environments (dlmrmcenv) was
executed.
Action
If the VMware vSphere CLI was
removed, install the VMware
vSphere CLI again, and then re-
execute the dlmrmcenv utility.
For details on the dlmrmcenv
utility, see The dlmrmcenv Utility
for Configuring HDLM Remote
Management Client Environments
on page 7-7 .
KAPL01151-E HDLM commands cannot be
executed because HDLM for
Windows is installed.
Details
HDLM for VMware and HDLM for
Windows cannot be used on the
same host.
Action
Remove HDLM for VMware and
install it on another host, or
remove HDLM for Windows.
KAPL01152-E The operation was canceled
because the path configuration
is being changed. Operation
name = aa...aa
Details
The operation was canceled
because the path configuration
was being changed during the
operation.
aa...aa: offline, online, or
view
Action
Check that the path configuration
is not being changed, and then
re-execute the operation.
KAPL01153-W During the offline operation
processing of the HDLM
command, a path that cannot be
placed in the Offline(C) status
was detected. PathID = aa...aa
Details
A path that cannot be set to the
Offline(C) status was detected
during multi-path offline
processing.
aa...aa: Path ID (decimal
(base-10) number)
Action
Messages
8-23
Hitachi Dynamic Link Manager User Guide for VMware ®