HP Hitachi Dynamic Link Manager Software - Manual (Page 61)

6
.
Check the results of the installation.
At the command prompt, check the unattended installation results
displayed by the installhdlm utility.
7
.
Restart the remote management client.
8
.
Log on to Windows on the remote management client as a member of the
Administrators group.
9
.
Launch the Administrator: Command Prompt window.
10
.
Execute the HDLM command's view operation to confirm that HDLM has
been installed.
An example of executing the dlnkmgr command's view operation is as
follows:
PROMPT>dlnkmgr -l view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
If x.x.x-xx is displayed in HDLM Version, the correct version of HDLM has
been installed.
When the unattended installation on the remote management client finishes,
go to New installation on host on page 3-9 .
New installation on host
The VMware vSphere CLI is used to install HDLM on a host. If the VMware
vSphere CLI is not installed on the remote management client, install it and
confirm that it can be used to connect to the host before continuing.
In addition, see the HDLM Release Notes beforehand to check offline bundle
file names and plugin names.
1
.
Copy all the offline bundle files stored in the remote management client
to a directory on the host.
Offline bundle files are stored in the following location on the remote
management client.
HDLM-installation-folder\plugin
2
.
Start the VMware vSphere CLI on the remote management client.
3
.
Change the host acceptance level.
Execute the following command to check the current acceptance level of
the host:
esxcli --server=host-name --username=user-name --
Creating an HDLM Environment
3-9
Hitachi Dynamic Link Manager User Guide for VMware ®