HP Hitachi Dynamic Link Manager Software - Manual (Page 139)

Displayed item
Description
No summary
displayed
Summary
displayed
-: The dynamic I/O path control function is not
supported.
If an LU whose settings differ from the settings
based on the system storage unit is included, *
is added after the on or off being displayed.
iLU LU number in the storage system.
This number combined with the storage system
name (shown in DskName) identifies the LU that
is accessed by a path.
•
For P9500, indicated by a hexadecimal
number. The first three characters of iLU
are the CU number, and the last two
characters are the internal LU number within
the CU. The first character of a CU number
is 0.
• For Hitachi AMS2000/AMS/WMS/SMS series
and HUS100 series, indicated by a decimal
number. The entire value of iLU is the
internal LU number within the storage
system. You can identify an actual LU by
referencing iLU from the storage system
management program.
• For Universal Storage Platform V/VM series
and Hitachi Virtual Storage Platform,
indicated by a hexadecimal number. The
first two characters of iLU are the number of
the logical DKC (Disk Controller), the middle
two numbers are the CU number, and the
last two characters are the internal LU
number within the CU.
SLPR
#1 - The number of the SLPR to which an LU belongs,
indicated by a number from 0 to 31. A hyphen
(-) is displayed if the storage logical partition
functionality for the storage system for the
target LU is not supported.
HDevName HDevName Host device name.
DPC - The setting information about the dynamic I/O
path control function is displayed for each LU.
on: The dynamic I/O path control function is
enabled.
off: The dynamic I/O path control function is
disabled.
-: The dynamic I/O path control function is not
supported.
PathID - The AutoPATH_ID. AutoPATH_ID is assigned
every time the host is restarted.
Command Reference
6-47
Hitachi Dynamic Link Manager User Guide for VMware ®