Table 6-13 lu – HP Hitachi Dynamic Link Manager Software User Manual
Page 138

When the -c parameter is specified with the -lu parameter, a summary
of LU configuration information is displayed on one line. The total number
of paths recognized by HDLM and the number of online paths are
displayed for each LU. You cannot specify the -c parameter together with
the -hdev or -pathid parameter.
For details on the contents of each display item, see
.
-t
Omits the title for each information item.
Example
The following example shows how to display a summary of LU
information (without selecting items to be displayed):
PROMPT>dlnkmgr view -lu -c
Product S/N LUs iLU HDevName Paths
OnlinePaths
SANRISE_AMS 77010152 1 0191 t10.HITACHI_770101520191
2 2
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Items of LU information
Table 6-13 LU Information on page 6-46
information. The following explains the table headings:
•
No summary displayed: The user specifies the -lu parameter.
•
Summary displayed: The user specifies the -lu -c parameter.
Table 6-13 LU Information
Displayed item
Description
No summary
displayed
Summary
displayed
Product
Model ID of the storage system
SerialNumber
S/N
Serial number of the storage system
LUs
Total number of LUs managed by HDLM among
the LUs in the storage system
Dynamic I/O Path
Control
-
The setting information about the dynamic I/O
path control function is displayed for each
storage system.
on: The dynamic I/O path control function is
enabled.
off: The dynamic I/O path control function is
disabled.
6-46
Command Reference
Hitachi Dynamic Link Manager User Guide for VMware
®