HP Hitachi Dynamic Link Manager Software - Manual (Page 129)

When the -srt parameter is omitted, the path information is listed in
ascending order of AutoPATH_IDs.
-t
Omits the title for each information item.
Example
The following example shows how to abbreviate the display of
information about the paths, ordered by iLU.
PROMPT>dlnkmgr view -path -c -srt lu
Paths:000012 OnlinePaths:000012
PathStatus IO-Count IO-Errors
Online 1616 0
PathID DskName iLU CP Status Type
000000 HITACHI .DF600F .0051 0005 0A Online Own
000003 HITACHI .DF600F .0051 0005 1A Online Non
000001 HITACHI .DF600F .0051 0014 0A Online Non
000004 HITACHI .DF600F .0051 0014 1A Online Own
000002 HITACHI .DF600F .0051 0015 0A Online Non
000005 HITACHI .DF600F .0051 0015 1A Online Own
000006 HITACHI .OPEN-3 .15001 0005 1H Online Own
000009 HITACHI .OPEN-3 .15001 0005 2H Online Own
000007 HITACHI .OPEN-3 .15001 0015 1H Online Own
000010 HITACHI .OPEN-3 .15001 0015 2H Online Own
000008 HITACHI .OPEN-3 .15001 0020 1H Online Own
000011 HITACHI .OPEN-3 .15001 0020 2H Online Own
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
Items of Path information
Table 6-9 Path Information on page 6-37 describes the displayed path
information. The following explains the table headings:
• No summary displayed: The user specifies only the -path parameter or
the -path -item parameter.
• Summary displayed: The user specifies the -path -c parameter.
Table 6-9 Path Information
Displayed Item
Description
No
summary
displayed
Summary
displayed
Paths Total number of displayed paths, indicated by a decimal
number.
Command Reference
6-37
Hitachi Dynamic Link Manager User Guide for VMware ®