HP Hitachi Dynamic Link Manager Software - Manual (Page 179)

Message ID Message Text Explanation
Action
Execute the operation-name -
help operation of the HDLM
command (dlnkmgr) to check the
format of the operation, and then
retry.
KAPL01143-W The host connection option
value cannot be specified.
Option = aa...aa
Details
aa...aa: Option for which an
option value cannot be specified
Action
Execute the help operation of the
HDLM command (dlnkmgr) to
check the host connection
options, and then retry. For
details on the help operation, see
help (Displays the Operation
Format) on page 6-5 .
KAPL01144-W The HDLM command was not
executed from the VMware
vSphere CLI command prompt.
Details
The HDLM command was not
executed from the VMware
vSphere CLI command prompt.
Action
Execute the HDLM command from
the VMware vSphere CLI
command prompt.
KAPL01146-I Because no path has been
selected among the currently
displayed paths, the paths in the
Offline(C) and Offline(E)
statuses will be changed to the
Online status. Is this OK?[y/n]:
Details
All the paths will be placed Online
because the path selection
parameter is not specified for the
online operation. To place all the
paths Online, enter y. To cancel
the operation, enter n.
Action
If you want to execute online
processing, enter y. If you want
to terminate processing, enter n.
Before you execute the
processing, be sure to execute the
view operation of the HDLM
command (dlnkmgr) to check the
path status. For details on the
view operation, see
view
(Displays Information) on page
6-24 . For details on the online
operation, see online (Places
Paths Online) on page 6-11 .
KAPL01147-I aa...aa path(s) were successfully
placed bb...bb; cc...cc path(s)
were not. Number of target
Details
This message indicates the
number of the paths processed in
an online/offline operation.
Messages
8-21
Hitachi Dynamic Link Manager User Guide for VMware ®