HP Hitachi Dynamic Link Manager Software - Manual (Page 132)

Displayed Item
Description
No
summary
displayed
Summary
displayed
When connecting to Universal Storage Platform V/VM
series, Virtual Storage Platform series, Hitachi AMS2000
series
#2 , Hitachi SMS series #2 , HUS100 series #2 , or HUS
VM, all paths are owner paths.
IO-Count
#1 - Total I/O count for the path, indicated by a decimal
number. The maximum value that can be displayed is 2
32 -
1 (4294967295). If the total I/O count reaches the
maximum value, it will re-start from 0.
To reset the IO-Count value to 0, execute the dlnkmgr
command's clear operation. Executing the clear operation
also resets the number of I/O errors (IO-Errors) to 0. For
details about the clear operation, see clear (Returns the
Path Statistics to the Initial Value) on page 6-3 .
However, a hyphen (-) is displayed when an algorithm
other than the following is used:
•
exrr: The Extended Round Robin algorithm
• exlio: The Extended Least I/Os algorithm
• exlbk: The Extended Least Blocks algorithm
IO-
Errors
#1
- Total I/O error count for the path, indicated by a decimal
number. The maximum value that can be displayed is 2
32 -
1 (4294967295). If the total I/O error count reaches the
maximum value, it will re-start from 0.
To reset the IO-Errors value to 0, execute the dlnkmgr
command's clear operation. Executing the clear operation
also clears the number of I/O operations (IO-Count) to 0.
For details about the clear operation, see
clear (Returns
the Path Statistics to the Initial Value) on page 6-3 .
DNum
#1 - When Dev indicates an entire LU, 0 is displayed.
HDevName
#1 - Host device name.
IEP
#1 - Information about the intermittent error.
This item is displayed only when you specify the -iem
parameter or when you specify iep for the -item
parameter.
One of the following values is displayed for each path:
•
-
Indicates that intermittent error monitoring is disabled
or the path status is Offline(C).
• A value of at least 0
Indicates the number of errors that occurred during
intermittent error monitoring (the path status is
Offline(E) or Online).
• *
6-40
Command Reference
Hitachi Dynamic Link Manager User Guide for VMware ®