HP XP Application Performance Extender Software - Manual (Page 56)

Figure 13 Controller Settings screen
.
Description Item
Displays the controller connected to the selected XP or P9500 disk ar-
ray. Controller(s) And Managed Array(s)
Information
Displays the IP address of the host running the controller. APEX Controller(s)
Displays the controllers. Available — Indicates that a controller is
available with the host.
Attach Controller
Displays the command devices associated to the selected array. Command Device Settings
Displays the IP address of the host running the controller. APEX Controller
Displays the port number of the command device. Port Name
Displays the command devices associated to the selected array. Command Devices
Switches the controller between the controlling and monitoring mode. Controller Active
Sets the selected command devices for the controller. Use Command Devices
Enables the selection of an array. Select Array
Yes — Indicates that a command device is selected.
No — Indicates that a command device is not in use.
In Use
Using P9000 Application Performance Extender 56