HP XP Application Performance Extender Software - Manual (Page 109)

D Creating command devices
If you are running XP RAID Manager (XP Business Copy and XP Continuous Access), you already
have command devices that can be used by XP Application Performance Extender also. If XP RAID
Manager is not in use, you must create a command device. To do so, you must use the XP Remote
Web Console (RWC) or the Remote Control applications. If you are using Command View XP Advanced
Edition Device Manager (Command View XP AE Device Manager), you must launch Command View
XP AE Device Manager, and then the XP RWC.
NOTE:
For further assistance, contact HP technical support.
Launching Command View XP AE
Complete the following steps before launching the XP RWC:
1. Launch the Command View XP AE Device Manager by typing http://:23015/
DeviceManager/
into a browser window.
NOTE:
If you are using a secured connection, the port number will be different and the URL will be in
the following format:
http://:23016/DeviceManager/
2. In the Login window, enter the user name as system and the password as manager, and click
Login.
3. In the Command View XP AE Device Manager window, click the Resources tab in the Command
View XP AE Device Manager Explorer navigation pane.
4. Click the Subsystems node and select the subsystem for which you want to create the command
device. (The individual subsystems are displayed in the Subsystems navigation pane, which is
on the right side of the Explorer navigation pane.)
5. Click Physical View to launch the XP RWC with administrator privileges (that is, administrator\ad-
ministrator).
6. In the XP RWC window, click GO > LUN Manager > LU Path and Security. A list of LDEVs appears.
7. Right-click the LDEV that you want to convert into a command device.
8. Select Enable\Disable from the drop down list.
9. Click Apply to save the changes and enable the selected LDEV as a command device.
HP StorageWorks P9000 Application Performance Extender Software User Guide 109