HP StorageWorks XP Remote Web Console Software - Manual (Page 71)

Retention Utility. For these program products, X TB (Y TB) appears for the program products that you
will be charged for the capacity you use. X indicates the licensed capacity, and Y indicates the used
capacity.
License Install Box
License Install is on the right side of the License Key window.
License Install has the following features:
• Mode allows you to select one of the following buttons: the Key Code button, the File button, or
the Available button.
• Key Code enables the Key Code text box, which allows you to enter the license key for the se-
lected option to be installed (see “ Enabling Options Using a License Key Code ” on page 113).
NOTE:
You cannot copy and paste text from other applications.
• File enables the File Name text box and the Browse button, which allow you to enter the name
of the desired license key file (see “ Enabling Options Using a License Key File ” on page 114).
When you select the Browse button, the dialog box to select the license key file is displayed.
As you select the desired license key file on the displayed dialog box, you can enter the license
key file name in the File Name text box.
• Available enables you to install available options automatically. The Available button can be
used only when the licensed capacity exceeds the mounted (or used) capacity because the
disk drives are reduced, or because the pairs are deleted by a program product such as
TrueCopy for Mainframe.
License Status Box
License Status is on the bottom right of the License Key window.
You can set the license to enable or disable for each program product option listed in the license key
list. If you select a program product option from the license key list, select any of the radio buttons
below, and then click Set, you can set the option to enable or disable.
• Enable: You can use the program product option.
If you set an option to Enable with the term key, the available days of the term key decrease by
one day. When the setting is applied, Installed is displayed.
• Disable: You cannot use the program product option.
If you set an option to Disable with the term key, the available days of term key will not decrease.
When the setting is applied, Installed (Disable) is displayed.
Identity Window
The Identity window displays information on the connected storage system.
To open the Identity window, log in to the Remote Web Console, and then click Go, System Information
and Information on the menu bar of the Remote Web Console main window. A storage partition
administrator can view the Identity window, but cannot change the information on the Identity window.
XP24000/XP20000 Remote Web Console User's Guide 71