File menu – HP StorageWorks XP Remote Web Console Software User Manual
Page 61
Description
Item
The PP Status displays the SIM severity level. PP Status is displayed if a SIM occurs related
to a program product license because the license is expired or the licensed capacity is
insufficient. However only the storage administrator with the Enable privileges for the
Storage Administrator Role will be able to see the display.
PP Status can display any of the following SIM severity level statuses:
•
•
•
•
•
If PP Status : Normal is displayed, no SIM has occurred. If any other status is displayed,
view either the License Key window or the Status window to identify which program
product has a problem. You may find that you need to consider purchasing the license.
When multiple SIMs occur, only the one with the highest severity is displayed. For
information on SIM severity levels (see “
PP Status
The Apply button applies all the changes or settings made on the Remote Web Console
main window.
This button is active only when you are in the Modify mode.
Apply button
The Cancel button cancels the changes or settings made on the Remote Web Console
main window.
This button is active only when you are in the Modify mode.
Cancel button
File Menu
When you click the File menu, the following commands are displayed.
•
The Basic Information command (
) displays the Reports Display dialog box, which displays the
basic configuration information on the storage system. The Reports Display dialog box is displayed
as another window apart from the Remote Web Console main window; therefore, it can be dis-
played regardless of the operation of the Remote Web Console options. For details on the Reports
Display dialog box, see “
•
The Refresh All command (
) allows you to update the information on the SVP and then display
the latest information on the Remote Web Console main window. When you click this command,
all information displayed on the Remote Web Console is reacquired from the storage system;
therefore, it takes time for the processing to complete.
• The Refresh All command is only displayed when you log in as a storage administrator. The
Refresh All command becomes available, when you have changed to Modify mode.
• While the update is in progress, the system status keeps changing and other users are not al-
lowed to operate from the Remote Web Console windows. A maintenance operation for the
storage system or an SVP operation by the HP service representative is not allowed, either.
Therefore, use of the Refresh All command is not recommended, unless error recovery is re-
quired.
• The Remote Web Console windows may not be properly displayed even though you have se-
lected the Refresh All command, while a maintenance operation of the SVP is in progress.
XP24000/XP20000 Remote Web Console User's Guide
61