Enabling or disabling a license, Conditions to enable available button, Enabling or disabling – HP StorageWorks XP Remote Web Console Software User Manual
Page 116: A license
Whether the options can be enabled using the Available button depends on the relationship between
the licensed capacity and the mounted capacity of the disk drives (or the used capacity of the pairs
or pool VOLs). The following table shows the condition to enable the Available button.
Table 20 Conditions to Enable Available Button
Available Button
Relationship between Licensed Capacity and Mounted Ca-
pacity (or Used Capacity)
Available
Mounted capacity or used capacity
Licensed capacity
Not available
Mounted capacity or used capacity > Licensed capacity
To install Remote Web Console options automatically on the Remote Web Console using the Available
button:
1.
Log in to the Remote Web Console and open the License Key window (“
2.
Change to Modify mode.
3.
From Mode, click Available.
4.
Click Install.
In the License Key list, the row of the options that can be enabled changes to
blue bold italics
and the Status column changes to
Install.
5.
Click Apply (or Cancel).
The status of the enabled options changes to Installed.
Enabling or Disabling a License
When you want to enable or disable the term key, you select enable or disable for the License Status.
You can also enable licenses when you install more than one program product option at once;
however, some program product options are not available because their requirements are not satisfied.
In this case, you need to satisfy the requirements first, and then enable the license.
To enable or disable a license:
1.
Log in to the Remote Web Console and open the License Key window (“
2.
Change to Modify mode (see “
Changing Between View Mode and Modify Mode
if you need instructions).
3.
Select the option that you want to set from the list.
4.
Select Enable or Disable in License Status.
5.
Click Set.
The row of the selected option changes to
blue bold italics. If you set to disable, the Status column
changes to
Install (Disable). If you set to enable, the Status column changes to Install.
6.
When you want to enable or disable other options, repeat steps 3 through 5.
7.
Click Apply (or Cancel).
The status of the program product options is changed.
Performing Remote Web Console Operations
116