Enabling options using a license key file – HP StorageWorks XP Remote Web Console Software User Manual
Page 114
4.
In Key Code, enter the license key code.
NOTE:
You cannot copy and paste text from other applications.
5.
Click Install.
The row of the installed option changes to
blue bold italics and the Status column changes to
Install.
IMPORTANT:
To implement the setting, you must click Apply.
• To disable the term key, perform the operations that are described in “
• When you want to enable other options, repeat steps 3 through 5.
6.
Click Apply (or Cancel).
The status of the enabled options changes to Installed.
The warning messages are displayed in the following cases:
• The error code # 405 5503 is displayed if you install an emergency key for an option that
has already been installed with a permanent key.
If you install the emergency key, it expires in 30 days.
• The error code #405 5501 is displayed if you install an emergency key when the option has
already been installed with a temporary key and the remaining lifetime of the option is more
than 30 days.
You cannot install an emergency key under these circumstances.
For details on these error codes, see the HP StorageWorks XP24000/XP20000 Remote Web
Console Error Codes.
Enabling Options Using a License Key File
You can enable multiple options in a single procedure, using a license key file. The license key files
are provided by HP.
To install Remote Web Console options on the Remote Web Console using the license key file:
1.
Log in to the Remote Web Console and open the License Key window (“
2.
Change to Modify mode.
3.
From Mode, click File.
The Browse button becomes available.
Performing Remote Web Console Operations
114