HP Surestore 64 Director Switch - Manual (Page 96)

84 show
show.nameServer
Syntax
nameServer
Purpose
This command displays information from the name server database for devices attached to
this switch.
Parameters
This command has no parameters.
Command Example
Root> show nameServer
Output
The device information data is displayed as a table that includes the following properties.
Type The type (N, NL, F/NL, F, FL, E, B).
Port Id The 24-bit Fibre Channel address.
Port Name The port world-wide name of the attached device.
Node Name The node world-wide name of the attached device.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
FC4 Types The FC4 types registered for this device. The numbers in this field
correspond to the list at the bottom of the table.