HP Surestore 64 Director Switch - Manual (Page 47)

config 35
CLI Com
m
a
nds
Command Example
Root> config snmp addCommunity 1 "CommunityName1" enabled 123.123.1
23.123 162
config.snmp.authTraps
Syntax
authTraps enabledState
Purpose
This command enables or disables the authorization traps to be sent to SNMP management
stations when unauthorized stations try to access SNMP information from the director or
switch.
Parameters
This command has one parameter.
Command Examples
Root> config snmp authTraps true
Root> config snmp authTraps 1
trapRecipient Specifies the trap recipient. Values must be 4 bytes in dotted-decimal format.
udpPortNum Specifies the UDP port number to which the director will send traps for each
recipient. The values must be a decimal number; the default value is 162.
Valid values include all legal UDP port numbers.
enabledState Specifies whether the authorization traps are enabled. Valid values are true
and false . Boolean 1 and 0 may be substituted as values.