HP Surestore 64 Director Switch - Manual (Page 105)

show 93
CLI Com
m
a
nds
show.security.portBinding
Syntax
portBinding
Purpose
This command shows the port binding configuration for all ports.
Parameters
This command has no parameters.
Command Example
Root> show security portBinding
Output
The port binding configuration data is displayed as a table that includes the following
properties.
Port The port number.
WWN Binding The state of port binding for the specified port (active or inactive).
Bound WWN The WWN of the device that is bound to the specified port. If this field is
blank, no device is bound to the specified port.