HP Surestore 64 Director Switch - Manual (Page 28)

16 Handling Command Line Interface Errors
Handling Command Line Interface Errors
Two types of errors detected by the Command Line Interface are:
• An error associated with the interface. For example, a keyword is misspelled or does
not exist.
Root> confg
Error 234: Invalid Command
• An error associated with fabric or switch issues. For example, a parameter error is
detected by the switch, where port 24 is entered for a switch that supports only 16 ports.
Root> config port name 24 "Port 24"
Error 13: Invalid Port Number
In either case, the command is ignored. The Command Line Interface remains at the point
it was before the command was entered.
The error messages, including error number and error, are listed in Appendix, Error
Messages.