HP Surestore 64 Director Switch - Manual (Page 112)

100 Appendix
This appendix lists and explains error messages for the Command Line Interface. Any
error numbers that are not listed are reserved for future use.
Note that the message that is returned is a string that includes both the error number and
the text of the message.
Message Cause/Solution
Error 08: Invalid Switch Name The value entered for the switch name is invalid. The name for
the director or switch can contain 0–24 characters. Enter a name
with 0–24 characters. If spaces are used, enclose the name in
quotation marks.
Error 09: Invalid Switch
Description The value entered for the switch description is invalid. The
description for the director or switch can contain 0–255
characters. Enter a description with 0–255 characters. If spaces
are used, enclose the name in quotation marks.
Error 10: Invalid Switch
Location The value entered for the switch location is invalid. The location
for the director or switch can contain 0–255 characters. Enter a
location with 0–255 characters. If spaces are used, enclose the
location in quotation marks.
Error 11: Invalid Switch
Contact The value entered for the switch contact is invalid. The contact
for the director or switch can contain 0–255 characters. Enter a
contact with 0–255 characters. If spaces are used, enclose the
contact in quotation marks.
Error 12: Invalid Port Address The value entered for the port address is invalid. Enter a valid
port address.
Error 13: Invalid Port Number The value entered for the port number is invalid. Enter a port
number within the range supported by your director or switch.
Valid values are:
0–63 for the FC-64
Error 14: Invalid Port Name The value entered for the port name is invalid. The port name for
the individual port can contain 0–24 characters. Enter a name
with 0–24 characters. If spaces are used, enclose the name in
quotation marks.
Error 15: Invalid BB Credit The value entered for the buffer-to-buffer credit is invalid. The
buffer-to-buffer credit must be an integer in the range 1–60.
Enter a value in the range 1–60 characters. A buffer-to-buffer
credit is not used for ports configured for extended distance.