HP Surestore 64 Director Switch - Manual (Page 92)

80 show
show.frus
Syntax
frus
Purpose
This command displays information about all FRUs.
Parameters
This command has no parameters.
Command Example
Root> show frus
Output
The FRU information is displayed as a table that includes the following properties.
FRU The FRU name. NotInstalled means the FRU is not installed.
Position The relative position of the FRU, that is, its slot.
State The state of the FRU. Values are:
Active—the current module is active.
Backup—this module is not currently being used, but it is available for
immediate failover.
Failed—the current module is failed.
Serial Num The serial number of the FRU.
Part Num The part number of the FRU.
Beaconing The beaconing state of the FRU (true or false).
Pwr On Hrs The power-on hours value for the FRU.