HP Surestore 64 Director Switch - Manual (Page 72)

60 config
Command Example
Root> config zoning deletePortMem TheUltimateZone 10 5
config.zoning.renameZone
Syntax
renameZone “oldZoneName” “newZoneName”
Purpose
This command renames a zone in the work area.
Parameters
This command has two parameters.
Command Example
Root> config zoning renameZone TheOldUltimateZone TheUltimateZone
config.zoning.showPending
Syntax
showPending
Purpose
This command shows the zoning configuration in the work area of the zone set that has not
yet been activated.
oldZoneName Specifies the current zone name of the zone to be renamed.
newZoneName Specifies the new zone name.