HP Surestore 64 Director Switch - Manual (Page 90)

78 show
show
The show branch of the CLI command tree contains commands that display, but do not
change, stored data values. Note that the displayed output that results from these
commands is not identical with the output from the show commands that are within the
other CLI command tree branches, for example, config.port.show.
The commands in the show branch can by used by either the Administrator or the
Operator.
show.eventLog
Syntax
eventLog
Purpose
This command shows the contents of the event log as maintained in NV-RAM on the
director or switch.
Parameters
This command has no parameters.
Command Example
Root> show eventLog