HP Surestore 64 Director Switch - Manual (Page 82)

70 perf
Output Example
The output from the perf.class2 command displays as follows.
Port Rx Frames Tx Frames Rx Words Tx Words Busied Frms Rjct Frames
---- --------- --------- -------- -------- ----------- -----------
0 134285 289355 890442 18483277 4 5
1 134285 289355 890442 18483277 4 5
2 134285 289355 890442 18483277 4 5
3 134285 289355 890442 18483277 4 5
4 134285 289355 890442 18483277 4 5
5 134285 289355 890442 18483277 4 5
6 134285 289355 890442 18483277 4 5
7 134285 289355 890442 18483277 4 5
8 134285 289355 890442 18483277 4 5
9 134285 289355 890442 18483277 4 5
10 134285 289355 890442 18483277 4 5
11 134285 289355 890442 18483277 4 5
12 134285 289355 890442 18483277 4 5
13 134285 289355 890442 18483277 4 5
14 134285 289355 890442 18483277 4 5
15 134285 289355 890422 18483277 4 5
perf.class3
Syntax
class3
Purpose
This command displays port Class 3 counters for all ports.
Busied Frms The number of times that FBSY was returned to this port as a result of a
Class 2 frame that could not be delivered to the other end of the link. This
occurs if either the fabric or the destination port is temporarily busy.
Rjct Frames The number of times that FRJT was returned to this port as the result of a
Class 2 frame that was rejected by the fabric.