HP Surestore 64 Director Switch - Manual (Page 95)

show 83
CLI Com
m
a
nds
Command Example
Root> show loginServer
Output
The device information is displayed as a table that includes the following properties.
Output Example
The output from the show.loginServer command displays as follows.
Port BB Crdt RxFldSz COS Port Name Node Name
---- ------- ------- --- ----------------------- -----------------------
0 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
1 10 2 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
4 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
7 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
8 10 2 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
10 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
11 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
12 10 3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
13 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
15 10 2,3 00:11:22:33:44:55:00:77 20:11:22:33:44:55:66:77
Port The port number where the device is attached.
BB Crdt The maximum number of remaining frames that can be transmitted without
causing a buffer overrun condition at the receiver.
RxFldSz The buffer-to-buffer receive data field size from the FLOGI received from the
attached N_Port.
COS The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
Port Name The port world-wide name of the attached device.
Node Name The node world-wide name of the attached device.