HP Surestore 64 Director Switch - Manual (Page 60)

48 config
Parameters
This command has one parameter.
Command Example
Root> config system location “Everywhere”
config.system.name
Syntax
name “systemName”
Purpose
This command sets the system name attribute.
Parameters
This command has one required parameter.
Command Example
Root> config system name “Joe’s Switch”
config.system.show
Syntax
show
systemLocation Specifies the new system location for the director or switch. The location can
contain 0–255 characters.
systemName Specifies the new system name for the director or switch. The name can
contain 0–24 characters.