Config.zoning.deactivatezoneset, Config.zoning.replacezoneset – HP Surestore 64 Director Switch User Manual

Page 64

52 config

config.zoning.deactivateZoneSet

Syntax

deactivateZoneSet

Purpose

This command places all attached devices in the default zone and takes effect immediately
fabric wide.

Description

The default zone must be activated independently of this command.

Note

This command takes effect immediately in the fabric.

Parameters

This command has no parameters.

Command Example

Root>

config zoning deactiveZoneSet

config.zoning.replaceZoneSet

Syntax

replaceZoneSet

Purpose

This command replaces the work area with the active zone set that is currently loaded on
the fabric.