HP Surestore 64 Director Switch - Manual (Page 43)

config 31
CLI Com
m
a
nds
Output Example
The output from the config.security.portBinding.show command displays as follows.
Port Number: 4
WWN Binding: Active
Bound WWN: AA:99:23:23:08:14:88:C1
config.security.userRights
config.security.userRights.administrator
Syntax
administrator “username” “password”
Purpose
This command sets the name and password for administrator-level access.
Description
Immediately after the name and password for the administrator is set, you will be
prompted to log in with the new access rights.
Parameters
This command has two parameters.
username Specifies the new user name for administrator-level login. Default is set to
Administrator . This parameter is 1–15 characters. Valid characters include
all characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.
password Specifies the password for administrator-level login. Default is set to
password . This parameter is 1–15 characters. Valid characters include all
characters in the USASCII character set, excluding control characters and
spaces. Spaces are not valid even though quotation marks are used.