HP Surestore 64 Director Switch - Manual (Page 76)

64 maint
maint
The maint branch of the CLI command tree contains commands that relate to maintenance
activities.
The commands in the maint branch can be used only by the Administrator.
Note that the maint.system.resetConfig command resets all configuration data and non-
volatile settings, including network information, to their default values (factory settings).
Management access may be lost until the network information is restored.
maint.port.beacon
Syntax
beacon portNumber beaconState
Purpose
This command enables or disables port beaconing for a particular port.
Parameters
This command has two required parameters.
Command Examples
Root> maint port beacon 4 false
Root> maint port beacon 4 0
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
beaconState Specifies whether unit beaconing is enabled. Valid values are true and false .
Boolean 1 and 0 may be substituted as values.