HP Surestore 64 Director Switch - Manual (Page 48)

36 config
config.snmp.deleteCommunity
Syntax
deleteCommunity commIndex
Purpose
This command entirely deletes a community from the SNMP
Parameters
This command has one parameter.
Command Example
Root> config snmp deleteCommunity 5
config.snmp.show
Syntax
show
Purpose
This command shows the switch SNMP configuration.
Parameters
This command has no parameters.
commIndex Specifies the community to be deleted. Valid values are integers in the range
1–6. This value was set in the commIndex parameter of the
config.snmp.addCommunity command. Valid values are integers in the range
1–6.