HP Surestore 64 Director Switch - Manual (Page 24)

12 Logging In and Logging Out
user enters any of the commands included in Table 2, Command Line Interface Command
Tree.
A user name and password can be set by the Administrator through the
config.security.userRights.administrator command or through the
config.security.userRights.operator command.
The access rights chosen for the CLI are completely independent of the other product
interfaces, for example, SNMP or HP product interfaces.
Parameters
This command has no parameters.
Command Examples
login
Username: Administrator
Password: password
login
Username: Operator
Password: password