HP Surestore 64 Director Switch - Manual (Page 51)

config 39
CLI Com
m
a
nds
config.switch.edTOV
Syntax
edTOV timeoutValue
Purpose
This command sets the E_D_TOV for the switch.
Description
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
R_A_TOV.
Parameters
This command has one parameter.
Command Example
Root> config switch edTOV 4
config.switch.interopMode
Syntax
interopMode interopMode
Purpose
This command sets the Interoperability mode for the switch.
timeoutValue Specifies the new E_D_TOV value. The units for this value are tenths of a
second. This parameter must be an integer in the range 2–600 (0.2 second to
60 seconds), and it must be smaller than the R_A_TOV.