HP Surestore 64 Director Switch - Manual (Page 38)

26 config
Parameters
This command has two required parameters.
Command Example
Root> config port type 4 fport
config.port.show
Syntax
show portNumber
Purpose
This command displays the port configuration for a single port.
Description
This show command, on the config.port branch, displays the current configuration for the
specified port.
Parameters
This command has one parameter.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
portType Specifies the type of the port. Valid values are eport , fport , and gport .
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64