HP 3PAR Service Processors - Manual (Page 73)

6.15 How to Manage Local Notification Records
3PAR Service Processor User’s Guide
9 When finished, click Add Record to add your new user profile.
The Update ST_USER Record screen appears. Then, a confirmation message appears at
the top of the screen to indicate that your user profile has been added.
10 Click Notification List to return to the List Notification Records table.
6.9 How to Manage Local Notification Records
After one or more user profiles have been defined, you can use those profiles to create local
notification records. Depending on how local notification was initially set up, one or more
notification records might already exist on the Service Processor. Use the features available
through the Notify bezel on the SPOCC screen to create additional notification records and to
edit or delete existing ones.
There are three types of local notification records:
■ Normal - This type of notification record is for when you want to be notified of events and
alerts concerning a particular operating site or storage server.
■ Symptom - This type of notification record is for when you want to be notified of a
particular symptom concerning a particular operating site or storage server.
■ Suppression - This type of notification record enables you to selectively suppress
notifications generated as a result of a specific symptom.
6.9.1 How to Add a Notification Record
To add a standard, or normal notification record
1 On the SPOCC screen, click Notify to display a list of all currently defined notification
records for the Service Processor.
2 On the List Notification Records screen, click the Add Record button; the Service
Processor - Select User screen appears.
3 On the Service Processor - Select User screen
a Choose a user profile from the User list.
b Choose a notification record type as follows:
■ To add a normal notification record, click Normal and continue to step 4.