HP 3PAR Service Processors - Manual (Page 36)

3.14 Defining the Service Processor Process Control Parameters
3PAR Service Processor User’s Guide
To edit the file transfer process parameters on the Service Processor:
1 From the SP Process Control submenu, type 1 for Alter Process Control Parms and press
ENTER .
The screen displays the current file transfer process settings.
2 Type the number corresponding to the process to reconfigure and press ENTER .
3 Type the ID number corresponding to the parameter selected for editing and press ENTER .
4 Type a new value for the parameter and press ENTER .
5 You are prompted to ENTER additional parameter IDs.
6 When finished editing parameters, type 0 and press ENTER .
10 52428800 When file size exceeds ethernet max size, break in down in parts this
size, in Kbytes
11 True Controls whether or not files are transferred over modem when
Remote Operation is active
12 NONE File type(s), maximum 5, that should be transferred first (comma[,]
separated list.)
13 True Controls the grouping of small files for transfer
14 50 Maximum number of files that can be grouped together for transfer
15 60 Wait this number of seconds before closing the current file group
16 SPxfertest Upload directory on Connection Portal (Relative to logon directory ../
stapp/)
17 SPdownload Download directory on Connection Portal (Relative to logon directory
../stapp/)
18 300 Minimum time, in seconds, that SPtransfer will remain quiesced
19 7200 Maximum time, in seconds, that SPtransfer will remain quiesced
ID Default Value Notes