HP 3PAR Service Processors - Manual (Page 35)

3.13 Defining the Service Processor Process Control Parameters
3PAR Service Processor User’s Guide
3.14 Defining the Service Processor Process Control Parameters
The SP Process Control Parameters function permits authorized users to view and alter the
content of some process control variables. These parameters control mainly the transferring
and handling of data destined for the connection portal.
To access the SP Process Control Parameters submenu:
1 From the SPMAINT main menu, type 1 for SP Control/Status and press ENTER .
2 Type 15 for SP Process Control Parameters and press ENTER .
3.14.1 Editing File Transfer Processes
Use the SP Process Control Parameters submenu to edit the file transfer processes parameters
for the Service Processor.
Table 3-1. Lists all parameters by ID number, provides their default values, and notes how they are
impacted by editing their values.
ID Default Value Notes
1 False Use Last In First Out (LIFO) when selecting next file to transfer
2 1 Perform transfer when this number of files are queued
3 15 Perform transfer at least every this number of days
4 1047527424 Maximum size, in Mbytes, of file queued for transfer via modem.
Larger file(s) are kept for 14 days
5 1047527424 Maximum size, in Mbytes, of file queued for transfer via ethernet.
Larger file(s) are kept for 14 days
6 True Controls the breaking down of large files (see next four(4) parameters)
7 10485760 Maximum size, in Kbytes, of a file to transfer over modem
8 10485760 When file size exceeds modem max size, break in down in parts this
size, in Kbytes
9 52428800 Maximum size, in Kbytes, of a file to transfer over ethernet