5 changing the sp default route, 6 changing the sp ip address, Changing the sp default route – HP 3PAR Service Processors User Manual
Page 27: Changing the sp ip address
3.5
Changing the SP Default Route
3PAR Service Processor User’s Guide
4
When prompted, confirm the stopping of InServ-related processes.
3.5 Changing the SP Default Route
Changing the Service Processor (SP) default route affects the network setting for handling
routing decisions to destinations not local to the Service Processor. The SP default route is the
communication link to a proxy host or the outside world. Typically, the same host is designated
as the gateway (see
3.8 Changing the Service Processor Default Gateway
To change the SP route:
1
From the SPMAINT main menu, type 2 for Network Configuration and press
ENTER
.
2
Type 4 for Change public network interface parameters and press
ENTER
.
3
Type 2 for Change Default Route and press
ENTER
.
4
Type a new default route and press
ENTER
.
5
The SP Network submenu appears; the new Default Route appears to the right of the
current Default Route. Type A, and press
ENTER
to quit, save, and activate the new Default
Route.
3.6 Changing the SP IP Address
To change the Service Processor’s IP address, select the following menu options from the
SPMAINT main menu:
1
From the SPMAINT main menu, type 2 for Network Configuration and press
ENTER
.
2
Type 4 for Change public network interface parameters and press
ENTER
.
3
Type 3 for Change IP Address and press
ENTER
.
4
From the Modify SP IP menu, type a new IP address and press
ENTER
.
5
The SP Network submenu appears, and the new IP address appears to the right of the
current IP address. Type A, and press
ENTER
to quit, save, and activate the new IP address.