HP 3PAR Service Processors - Manual (Page 53)

5.5 Managing Connection Portal Controls
3PAR Service Processor User’s Guide
5.4.1 Activating Secure Network Mode
1 Type A for Activate Secure Network Mode and press ENTER.
3PAR Service Processor Menu
Transfer media: ethernet Transfer status: Ok
Connection Portal Control
Enter Control-C at any time to abort this process
1 ==> Current Connection Portal (Default : )
2 ==> Connection Portal Public IP (Default : )
3 ==> Host Route to Portal (Default : )
4 ==> Proxy Service: (NOT CONFIGURED : )
Proxy Name ( : )
Proxy Address ( : )
Proxy Type ( : )
Proxy Port ( : )
5 ==> CP Phone number(s) (1-866-354-3089 : )
6 ==> Dialout prefix ( : )
S ==> Save changes
I ==> Ignore Dialtone: ( NO )
D ==> Restore 3PAR defaults
F ==> Force Key Exchange
A ==> Activate Secure Network Mode
X Return to previous menu without saving changes
A