1 changing the transfer media, 2 changing the remote operations transfer media, Changing the transfer media – HP 3PAR Service Processors User Manual
Page 30: Changing the remote operations transfer media

3.8
Changing Transfer Media Settings
3PAR Service Processor User’s Guide
3.9.1 Changing the Transfer Media
Use this sub option to alter the media the Service Processor uses for sending an event or alert
data and related files to a connection portal.
To change the transfer media:
1
From the SP Transfer Medias submenu, type 1, Data Transfer and press
ENTER
.
2
When the SP Transfer Medias Configuration menu appears, type E|e, M|m, or O|o and press
ENTER
. The SP Transfer Medias submenu appears.
3
Make any additional changes to Service Processor phone number and dial-in prefix as
necessary.
4
When finished, type A and press ENTER to quit, save, and activate the new transfer media
settings.
3.9.2 Changing the Remote Operations Transfer Media
Use this sub option to alter the media the Service Processor (SP) uses when conducting
problem-solving activities and diagnostics performed from a remote location.
To change the remote operations transfer media:
1
From the SP Transfer Medias submenu, type 2 for Remote Operations and press
ENTER
.
The SP Transfer Medias Configuration menu for remote operations appears
2
Type E|e for Ethernet,
M|m
for modem, or O|o for off and press
ENTER
.
The SP Transfer Medias submenu appears.
NOTE: The SP Transfer Medias submenu may show additional items. Changed
options appear to the right of the current values.
NOTE: The SP Transfer Medias submenu may show additional items. Changed
options appear to the right of the current values.