HP 3PAR Service Processors - Manual (Page 26)

3.4 Mounting or Unmounting a CD-ROM
3PAR Service Processor User’s Guide
3.3 Mounting or Unmounting a CD-ROM
When using a CD to deploy a software update or InForm installation via the Service Processor
(SP), the CD needs to be mounted and unmounted.
To mount a CD-ROM:
1 Insert a CD into the SP’s CD-ROM.
2 From the SPMAINT main menu, type 1 for SP Control/Status and press ENTER .
3 Type 9 for Mount a CDROM from the SP main menu and press ENTER .
4 When prompted, type y and press ENTER to mount the CD.
■ To unmount a CD-ROM:
1 Type 10 for Unmount a CDROM and press ENTER .
2 When prompted, type y and press ENTER to unmount the CD.
3 Remove the CD from the CD-ROM.
3.4 Stopping/Starting InServ-Related Processes
This feature allows you to stop and start the spevent and spcollect processes to a
particular storage server (InServ). It may be useful as a diagnostic to stop and then start the
InServ-related processes if you are having problems with the Service Processor (SP)
communicating with the storage server.
Unlike maintenance mode, stopping InServ-related processes does not attempt to limit or
accept events that can occur while InServ-related processes are stopped. When the processes
are restarted manually or as a result of restarting the SP, all pending events are transferred to
3PAR Central or a local service provider.
To stop or start InServ-related processes:
1 From the SPMAINT main menu, type 1 for SP Control/Status and press ENTER .
2 Type 4 for Stop InServ related Processes or 5 for Start InServ related Processes and
press ENTER .
3 Select the InServ to stop or start related processes and press ENTER .