HP ProLiant DL740 Server - Manual (Page 95)

Installing Hardware Options, Non-Hot-Plug
6. Open the top left access panel, as shown in Chapter 3.
7. Slide the retaining clip (1) and remove the Array Enabler board (2) from the
server, as shown in Figure 4-9.
NOTE: Retain the Array Enabler board for future use.
Figure 4-9: Removing the Array Enabler board
HP ProLiant DL740 Server User Guide 4-13
HP CONFIDENTIAL
Writer: Anna Roberts File Name: e-ch4 Install Hardware Options Non Hot-Plug.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:07 PM