HP ProLiant DL740 Server User Manual
Page 246
LED Indicators and Switches
Table D-2: PCI Hot Plug LEDs and Button
Amber LED
OK to
Open
Slot Condition and Status
Off
Slot does not require attention.
1
On
Slot requires attention. There may be a problem with the
slot, the PCI board, or the driver. Check the green LED
before opening the slot.
Refer to the IML or the PCI Hot Plug software application
for a description of the problem indicated.
Green LED
OK to
Open
Slot Condition and Status
On
No
Power is applied to the slot.
Blinking
No
Power to the slot is being turned off or on. This process
may take several minutes. Do not open the slot release
lever until the green LED is completely off.
2
Off
Yes
You can replace or remove the board in this slot only.
3
PCI Hot Plug
Button
Each PCI Hot Plug button is used to activate or deactivate its associated
PCI Hot Plug slot. Activating or deactivating a PCI Hot Plug slot can also
be accomplished through the operating system PCI Hot Plug software
application. For more information about the PCI Hot Plug software
application, refer to the “PCI Hot Plug Operating System Support”
section in Chapter 5.
D-14
HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: n-appd LED Indicators and Switches.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:39 PM