HP ProLiant DL740 Server - Manual (Page 110)

Installing Hardware Options, Hot-Plug
Installing DIMMs in the Memory Cartridge
CAUTION: When handling a DIMM, be careful not to touch any of the contacts.
Doing so may damage the DIMM.
IMPORTANT: Be sure that DIMMs are installed in the proper orientation. The DIMMs are
keyed to ensure they are installed correctly in the memory socket. Refer to your system
documentation for details.
IMPORTANT: Be sure that the DIMMs are installed in bank pairs and in proper bank pair
order (1+2, then 3+4, then 5+6, then 7+8).
To install DIMMs in the memory cartridge:
1. Slide each DIMM into the appropriate socket on the memory board (1).
2. Secure the DIMMs by lifting the locking levers into place (2).
Figure 5-7: Installing SDRAM DIMMs into the memory
cartridge
HP ProLiant DL740 Server User Guide 5-11
HP CONFIDENTIAL
Writer: Anna Roberts File Name: f-ch5 Installing Hardware Options Hot-Plug.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:09 PM