HP ProLiant DL740 Server - Manual (Page 260)

Troubleshooting Information
Table E-4: Does the Server Have Video?
Answer Possible Reasons The Next Step
Yes Video is available for diagnosis.
Determine the next action by observing
POST progress and error messages.
Refer to the HP Servers
Troubleshooting Guide for a complete
description of each POST error
message.
No Video may not be connected
properly.
Switches may not be set correctly
on the system board.
A processor may have failed.
A nonbootable memory
configuration may be present.
Make sure that the video cable is
properly connected.
Verify the video connections. Refer to
the HP Servers Troubleshooting Guide.
Verify the switch settings on the system
board. Refer to “System Board
Switches” in Appendix D.
If Cartridge Power LEDs for all installed
memory cartridges are blinking, and
selected DIMM status LEDs are
blinking, refer to Table E-6.
Are there any audible indicators, such
as a series of beeps? A series of beeps
are the audible signal indicating the
presence of a POST error message.
Refer to the HP Servers
Troubleshooting Guide for a complete
description of each beep sequence and
the corresponding error messages.
HP ProLiant DL740 Server User Guide E-9
HP CONFIDENTIAL
Writer: Anna Roberts File Name: o-appe Troubleshooting Information.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:41 PM