HP ProLiant DL740 Server - Manual (Page 254)

Troubleshooting Information
NOTE: ASR-2 can be enabled to restart your server and automatically load the operating
system. If a critical error occurs, ASR-2 logs the error in the Integrated Management Log (IML)
and restarts the server. The system ROM then pages the designated administrator and
executes the normal restart process.
6. Restart the server.
7. The front panel system power LED turns from Standby (blinking green) to On
(solid green).
8. The fans start up.
9. Video initialization occurs. If a monitor is connected, it also displays the HP
initialization screen.
10. The monitor displays messages in the following sequence regarding server
initialization:
— Memory test
— Memory initialization
— Processor initialization
— Diskette drive
— Option ROM
— SCSI devices
11. The operating system loads to complete the boot process.
If completing these steps does not solve the problem, continue with the following
section.
HP ProLiant DL740 Server User Guide E-3
HP CONFIDENTIAL
Writer: Anna Roberts File Name: o-appe Troubleshooting Information.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:41 PM