HP ProLiant DL740 Server - Manual (Page 66)

Installing the Server in a Rack
5. Reach around the front of the server to press the rail-release levers at the front of
both server rails, and continue to slide the server into the rack.
Figure 2-9: Sliding the server to the rear of the rack
6. After the server reaches the rear of the rack, slide it back out of the rack until the
rack assembly is fully extended and the rails lock. This action initializes the rail
lock for future use.
7. Press the rack levers at the front of the server rails to release the lock, and slide
the server all the way back into the rack.
HP ProLiant DL740 Server User Guide 2-23
HP CONFIDENTIAL
Writer: Anna Roberts File Name: c-ch2 Installing the Server in a Rack.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:00 PM