HP ProLiant DL740 Server - Manual (Page 71)

Server Access
Accessing the Host Module
To access the host module to install or replace hot-plug fans or PCI Hot Plug boards:
1. Slide the chassis out of the rack.
2. Unlock the top latch security screw and raise the latch (1), as shown in
Figure 3-2. Hold down the top right access panel and lift the top left access panel
(2). Then lift the top right access panel (3).
Figure 3-2: Opening the top access panels
You can now remove and replace the hot-plug fans and PCI/PCI-X Hot Plug
expansion boards as described in Chapter 5.
3-4 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Server Access.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:04 PM