HP ProLiant DL740 Server - Manual (Page 78)

Server Access
Removing the Power and Media Module
WARNING: The power and media module weighs more than 16 kg (35 lbs) HP
recommends removing both power supplies before handling the module, or
having two people handle the module together.
CAUTION: Do not attempt to remove the power and media module while power is
applied to the system. The module is not hot-pluggable. Immediate system shutdown
and data loss will occur.
To remove the power and media module:
1. If the server is on, place the computer in standby mode and disconnect the power
cords. Refer to Chapter 7.
2. Unseat or remove the host module from the server chassis.
3. Remove the power supplies from the front of the module.
HP ProLiant DL740 Server User Guide 3-11
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Server Access.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:04 PM