Appendix g: system battery, Internal battery, Appendix g – HP ProLiant DL740 Server User Manual

Page 268: System battery

System Battery

This appendix provides information about the ProLiant DL740 server system battery.

Internal Battery

To remove the internal battery:

1. Shut down the operating system in an orderly manner as directed in the operating

system instructions.

2. Place the computer in standby mode and disconnect the power cords (refer to

Chapter 7).

3. Open the top access panels.

4. Locate the battery on the host board, as shown in Figure G-1.

5. Pull the battery out of the battery socket.

6. Reverse steps 1 through 5 to replace the battery.

HP ProLiant DL740 Server User Guide

G-1

HP CONFIDENTIAL

Writer: Anna Roberts File Name: q-appg System Battery.doc

Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:42 PM