HP ProLiant DL740 Server - Manual (Page 69)

Server Access
Server Access Overview
The ProLiant DL740 server chassis facilitates the installation of hardware upgrades
through the use of two removable modules and top access panels. The following table
describes the contents of the modules and how to access the components.
Table 3-1: Module and Bay Components and Access
Module Contents Access Method
PCI Hot Plug expansion slots Open the top access panels.
Configuration switches Open the top access panels.
Fans 1 and 2 Open the top access panels.
Processor sockets
Open the top access panels and
remove the processor boards.
Host module
Memory (DIMMs)
Open the top access panels and
remove the memory cartridge.
Power supply 1 and 2
Access directly at the front
of the server.
Universal media bay
Access directly at the front
of the server.
Power and media module
Hot-plug hard drives
Access directly at the front
of the server.
The following sections provide instructions for removing the power and media
module and host module. For information pertaining to PCI Hot Plug and hot-plug
fan access, refer to Chapter 5.
CAUTION: Do not attempt to remove either of the modules while power is applied to
the system. They are not hot-pluggable. Immediate system shutdown and data loss
will occur.
3-2 HP ProLiant DL740 Server User Guide
HP CONFIDENTIAL
Writer: Anna Roberts File Name: d-ch3 Server Access.doc
Codename: Expedition Part Number: 270854-002 Last Saved On: 6/17/03 2:04 PM